Vinyl fencing is made from synthetic plastic or PVC and is a very popular option for anyone looking to add privacy, color, or a decorative finish with curb appeal. You can find designs that look like wood without the high maintenance costs that come with it, as well as styles in vibrant or neutral colors, decorative designs, and high vinyl panels and posts created for privacy and security.
If you’re building a fence in your backyard, it’s worth knowing the main benefit of vinyl: durability. “Vinyl is a popular material for fencing due to its durability and low maintenance,” added Lawn Love CEO Jeremy Yamaguchi. (opens in new tab).
It’s true that vinyl fencing doesn’t need to be stained, treated or painted to resist sun, wind and rain, and it’s easy to clean with a pressure washer, saving you time and money in the long run.
Your initial material outlay may cost more than your choice of wood style, but it should last for decades. Keep in mind that almost all vinyl fencing can be installed in soil, while only some can be used with concrete or specially designed post inserts.
Our guide shows how to install vinyl fencing in just a few days.
How to Install Vinyl Fence
“To ensure your garden fencing idea will last a long time, you can choose to install vinyl fencing,” says home and garden’ Garden and landscaping expert Rachel Crowe. “While you can opt for a more adventurous fence decorating idea by choosing one color of vinyl, we always recommend choosing a neutral option that will match any planting or paint color you or the new owner chooses on the exterior of the home Match in the future. After all, this fence should last for years.
You will need:
- back pit excavator
- Vinyl Fence Panels, Posts and Brackets
- vinyl adhesive
1. Check first
Before you start, let your neighbors know about your plans, check if there are any underground pipes or utilities in which you want to fence by calling 811, and see if your deed has any easements, which are a right of way Any other owner or utility company on your border. You should also check your local zoning laws and obtain a permit if needed.
2. Mark the location
The success of your vinyl fencing will depend on the preparation you do before you get started. Use landscaping stakes to put fence lines all the way, including corners and any gates you want to include. Tie some string between the corner posts to show where the wire posts will be installed. Next, measure the vinyl panel and use this length to mark the location of your post.
3. Dig the column hole
Next, dig holes for the posts that are deeper and wider than the posts themselves. For this you can use a post hole excavator, ideally you need to be about a third deeper than the length of the post. For main posts and any door posts, these should be 6 inches deep for added strength. Fill all holes with 6 inches of gravel to drain the water off the post when you are done.
4. Install the post
To hold the fence posts in place, fill each hole with fast-setting concrete and tap the posts into place, starting at the ends and corners first. Tie some string between the posts along the fence line and make sure the posts are all level.
5. Add a fence panel
Once the concrete is set and all posts are ready, you can attach the rail brackets to the fence posts, making sure you only use the recommended brackets and screws, following the fence instructions. Now you can simply slide all the panels into place and secure with the included screws and brackets. Place the top of the post on it and secure it with vinyl adhesive.
How do you make vinyl fences really strong?
Once everything is in place and everything is straight, you can instantly make your vinyl fence stronger by tightening all posts, railings, and pickets. For extra durability and to make sure it doesn’t blow over in strong winds, you can also reinforce the columns with concrete.
Do I need a permit to install my vinyl fence?
Generally, a permit is not required if the fence in the backyard is less than 6 feet high or the fence in the front yard is less than 3.5 feet. However, it’s best to check before you start, as it also depends on where you live. Areas with large numbers of homes and properties will most likely require permits, so check with your town’s building inspector or visit your local council’s website for information.